UISOLAR frameless solar clamps are made of Aluminum 6005-T5 & EPDM and used for the framless solar panel installation. It's approved by First Solar & Canadian Solar & JA Solar. Thin Film Clamps especially for: 1.First Solar series 4 Modules 2.Canadian Solar CS6X-P-FG 3.Trina Solar Duomax TSM-PEG14. 4. JA Solar 5. Other panel with the thickness 4~9mm
Pile Ground Mounting is one of strong structure of UISOLAR. Steel post can easily dig into the earth around 1.4 meter by machine. The Single Ground mounting have highly corrosion resistant as the hot-dip galvanizing average layer thickness is more than 80μm.
The Ground Bolt can also accept customized as request. The regular diameter is 76mm, and the Ground Plate diameter can be 200mm and 220mm. The length can be 1.2m, 1.6m, 1.8m and 2m. The thickness is 2.5mm, 2.75mm, 3.0mm. Hot dip galvanized average thickness is more than 80μm.
New Adjustable ballast mounting is suitable for flat Concrete roof . Aluminum structure can adjust easily as per the request. No penetration to the roof, all the solar panel will connect as a whole part and increase the strength. Adjustable bracket range is 10-35 deg.
New Aluminum ballast mounting is suitable for flat Concrete roof. Aluminum structure don't need penetrate to the roof, all the solar panel will connect as a whole part and increase the strength. Adjustable bracket range is 10-35 deg.
ST6 Solar steel Ground Mounting is usually applicable to the open filed and ground. It has good strength and can be easy to install for solar panel mounting.